There’s Always a Project
← Field journal

Home security

How many days of footage will my security cameras keep?

Estimate recording days from usable storage, camera count, bitrate and recording hours. Then compare the estimate with the oldest clip you can actually play.

Five days on the timeline, three days on the display

On 10 March 2026, I found five days of footage on my home camera timeline. Later in the same check, after I changed the frame rate, UniFi Protect still showed a capacity estimate of three days. I had a date range for the footage already recorded and a prediction for how much would fit at the new settings. My notes end with that estimate, so the effect of the change is still an open question.

When planning cameras for a house, start with a question like “Could I look up a delivery from two weeks ago?” Then compare the storage that question calls for with the recording space you actually have.

Camera storage and retention calculator

Enter the usable storage allocated to camera recordings after formatting, redundancy and any space set aside for other uses. Use the total recording allocation, including space already occupied by clips.

What fits on 1 TB?

Suppose two cameras each average 4 Mb/s and record around the clock. They write 86.4 GB per day between them. With 1,000 GB available, that gives about 11.6 days. Keeping 14 days at that rate takes about 1,210 GB. These figures are a planning example.

To work it out by hand, multiply the number of cameras by the bitrate per camera in Mb/s, the hours each records per day and 0.45. That last factor converts one megabit per second for one hour into decimal gigabytes. Divide usable GB by GB recorded per day to get days of footage. If you already know your daily recording volume, start at that last step. Here, 1 TB equals 1,000 GB.

Check the oldest recording you can play

  1. Read the recording mode for each camera. In UniFi Protect, continuous recording writes throughout the day. Detection-only recording saves triggered events, so the hours recorded can vary with activity. UniFi recording modes and schedules.
  2. Look at the recorder’s retention settings. A time limit can remove clips before the disk fills. Enhanced Retention can keep older clips at lower quality. The calculator assumes one typical daily recording volume throughout the period. UniFi storage and retention settings.
  3. Play the oldest clip you can find. Note its date, the camera and the day you checked. If you change a setting, repeat the check once enough new footage has accumulated. For event recording, also check that you can find the kind of event you care about inside that period.

For the equipment we use and the choices that affected the house plan, see our home networking guide.

Sources

Household camera observations from March 2026. The calculator uses the storage and recording assumptions entered by the reader.